Dusky Control - USB Controllers

Single output

This controller allows you to control one Sky or Sky+ box from a PC via USB.

A typical setup for the single output controller would be:


You would use this controller if:

• You do not have other devices connected to the 'RF2 out' port (eg. TVlinks, Sky gnome).
• The sky box is close enough to the PC that you can run the RF2 cable to the Sky controller and a video cable from the sky box to your PC's TV card.

Price: 41 UKP + P&P

Single output with RF passthrough

This controller allows you to control one Sky or Sky+ box from a PC via USB, and also has a 'pass through' RF connector to allow other devices to be connected to the Sky box 'RF2 out' port.

A typical setup for the single output RF passthrough controller would be:

You would use this controller if:

• You already have devices connected to the 'RF2 out' port (eg. TVlinks, Sky gnome) - please note that in this case you will need a modified 'power passthrough' version. The modification is free, but please add a note to your order or email us to let us know.
• The sky box is in a different room to the PC and you only want to run a single RF cable between them.

Price: 43.50 UKP + P&P

Dual output

This controller allows you to control one or two Sky/Sky+/Sky HD/foxtel iQ/foxtel Pace 420 boxes from a PC via USB. Each sky box can be individually controlled.

A typical setup for the dual output controller would be:


You would use this controller if:

• You do not have other devices connected to the RF2 port (eg. TVlinks, Sky gnome).
• The sky box is close enough to the PC that you can run the RF2 cables to the Sky controller and the videos cable from the sky box to your PC's TV card.

Price: 49.50 UKP + P&P

Need more outputs?

We can custom produce controllers for controlling any number (within reason!) of sky boxes.

Price: Price: Available on request